Bosch Rexroth Axial piston variable displacement double pump A8VO Rotary drilling rig Crane Pile driver
Features
– Variable displacement twin pump with two axially tapered piston rotating assemblies in a slanted axis design for hydrostatic transmission in open circuits
– Flow rate proportional to input speed and displacement and infinitely variable in the range qv max to qv min(0)
– Pump suitable for direct mounting on the flywheel housing of diesel engines
– Common suction port for auxiliary pump and both oil circuits
– Powerful control program for different control and regulation functions
– Separate power controller
– Integrated auxiliary pump with pressure relief valve, optional additional pressure relief valve
– Various PTO versions for mounting axial piston and gear pumps
– Excellent power/weight ratio
– Long service life
Control device
Separate power controller without power override
With hydraulic stroke limiter (positive control) and external pilot oil pressure supply
With load sensing
With hydraulic power coupler
And load sensing
And hydraulic stroke limiter (negative control)
Hydraulic stroke limiter (positive control) and external pilot oil pressure supply
Hydraulic stroke limiter (negative control) and external pilot oil pressure supply
Separate power controller with power override via pilot pressure
With hydraulic stroke limiter (positive control) and external pilot oil pressure supply
With load sensing
With hydraulic power coupler
And load sensing
And hydraulic stroke limiter (negative control)
Hydraulic stroke limiter (positive control) and external pilot oil pressure supply
Hydraulic stroke limiter (negative control) and external pilot oil pressure supply
Electrical control with proportional solenoid (positive control) U = 24 V
Safety instructions
– The A8VO pumps are designed for use in open circuits.
– Project planning, assembly and commissioning of the pumps must be carried out by qualified personnel.
– The service and function ports are designed only for the installation of hydraulic lines.
– There is a risk of burns from the motor (especially the solenoid) during and shortly after operation. Take appropriate safety precautions, such as wearing protective clothing.
– The pump characteristics may vary, depending on the operating conditions of the pump (operating pressure, oil temperature).
– Tightening torques:
- The tightening torques stated in this technical data sheet are maximum values and must not be exceeded (maximum values for thread torque).
The manufacturer's instructions for the maximum permissible tightening torques of the mounting tools used must be observed!
- For DIN 13 fixing screws, we recommend that their tightening torques be checked individually in accordance with VDI 2230, 2003 edition.
– The data and information provided here must prevail.
Installation instructions
During commissioning and operation, the axial piston unit must always be filled with hydraulic oil and purged of air. This also applies to relatively long periods of inactivity, since
the system can drain through the hydraulic lines.
The case drain is internally connected to the suction chamber. It is not necessary to connect the case drain line to the tank.
Note the characteristics of flushing fluid for size 200. (port R4)
The suction line must lead to a point below the minimum oil level in the tank in all operating states.
The minimum suction pressure at port S must not drop below 0.8 bar.
Mounting position
Shaft horizontal.
Mounting below tank
Mounting below tank means that the pump is installed below the minimum oil level in the tank.
For more detailed parameters of A8VOand other models, please contact our sales staf
Finished product display
Product Tags:
|
|
Bosch Rexroth Axial Piston Variable Displacement Double Pump A8VO Rotary Drilling Rig Crane Pile Driver Images
|
